5454
*NOTE: For CDi Classic, CDi Compact and Si Compact
you must refer to the table on page 53 to calculate your
horizontal fl ue lengths and plume management lengths.
Plume management system with extensions
Components
Part No. 60mm
7 716 191 086 7 716 191 087
Maximum lengths (mm) & no. of components required
Greenstar CDi Classic, CDi Compact*, Si Compact
and i Junior series
60mm 4,500 1 up to 4
Plume management system
Components
Part No. 60mm
7 716 191 086
Maximum lengths (mm) & no. of components required
Greenstar CDi Classic, CDi Compact*, Si Compact
and i Junior series
60mm 500 1
Plume management system with extensions and 45º bend
Components
Part No. 60mm
7 716 191 086 7 716 191 087 7 716 191 089
Maximum lengths (mm) & no. of components required
Greenstar CDi Classic, CDi Compact*, Si Compact
and i Junior series
60mm 3,750 1 up to 4 1
Plume management system with angled termination
Components
Part No. 60mm
7 716 191 086 7 716 191 087
Maximum lengths (mm) & no. of components required
Greenstar CDi Classic, CDi Compact*, Si Compact
and i Junior series
60mm 4,500 1 up to 4
Plume management system with extensions and 45º bends
Components
Part No. 60mm
7 716 191 086 7 716 191 087 7 716 191 089
Maximum lengths (mm) & no. of components required
Greenstar CDi Classic, CDi Compact*, Si Compact
and i Junior series
60mm 3,000 1 up to 3 2
To Next Page
Loading...
