Page 10 from 43 6 720 887 547 “SM FP_ErP MPP Europe 2018/08 en”
Pict.10 – Control Panel HMI Overview T5600-T5700
On / Off button
The main switch is assembled on the PCB and disconnects the
unit so no voltage at components is present although anti-freeze
kit keeps active due to temperatures checks even in Off mode.
Menu Button
- Used to Enter in service mode to access service parameters
which can be used by the user, installer, technician
Program Button
- Used to Scroll back in the service mode menu when navigating
menus
OK Button
- Save value or adjust set values
- Save a temperature setting (user)
Selection button
Used to scroll inside menu ensuring navigation on parameters
inside the diagnostic mode
Table 6 – Control Panel Buttons
Temperature Unit:
ºC – default value
ºF – alternative value
Selection can be done by
changing default value on
service mode (P6) inside SA
(settings) parameter
To Next Page
Loading...
