Pict.18 – Heat exchanger
For its protection and ensuring maximum life time, there is over-heating protection ensured by a
bimetallic thermostat in direct contact with the copper and one thermal fuse around the heat
exchanger.
Pict.19 – Temperature limiter (activation at 85ºC)
The thermal fuse is located around the heat exchanger and for protection is insulated,
nevertheless is composed by 4 specific fuses that melt at 192 ºC in the event of an overheating.
Pict.20 – Thermal Fuse with / without insulation
To Next Page
Loading...
