Set up and connecten
The device has an automatic quantity
control.
4.2 Scope of Delivery
After unpacking, check all parts for
transport damage and that the
delivery is complete.
aThe quantity automatic fits the
water consumption and the
duration of the program optimally
to the type of fabric and the load.
ATTENTION!
Operation with incomplete or
defective accessories can impair the
function of the device or lead to
property damage and damage to the
device.
▶ Do not operate the device with
incomplete or defective
accessories.
▶ Replace relevant accessories before
operating the device.
→
"Accessories", page 28
3.3 Energy Saving Mode
If you do not operate the device for a
long time, it automatically switches to
energy-saving mode. The energy
saving mode is ended by operating
the device again.
4 set up and
Connect
A notice:The device was tested at the
factory to ensure it is working
properly. Water stains may remain in
the device. The stains disappear after
the first wash.
4.1 Unpack the device
ATTENTION!
Objects left in the drum that are not
intended for operation in the device
can lead to property damage and
damage to the device.
▶ Remove these items and the
supplied accessories from the drum
before operation.
The delivery consists of: ¡
Washing machine
¡accompanying documents
¡transport locks
→
"Remove transport locks",
page 14
¡cover caps
¡water inlet hose
→
"Connecting the water inlet
hose", page 15
1.Completely remove the packaging
material and protective covers from the
device.
4.3 Site Requirements
→
"Dispose of packaging",
page 12
2.Check the device for visible damage.
WARNING
Electric shock hazard!
The device contains live parts.
Touching live parts is dangerous.
▶ Do not operate the device without a
cover plate.
3.Open the appliance door.
→
"Basic operation", page 29
4.Remove the accessories from the
drum.
5.Close the appliance door.
13
To Next Page
Loading...
