serviceen
2.Push the dosing aid forward. 3.If necessary, fill in the care product.
4.Push in the detergent drawer.
13.8 Start program
A notice:If you want to change the time
until the end of the programme, set
the Ready in time first.
▶ onStart/Reloadto press.
aThe drum rotates and it
A load detection follows, which can
last up to 2 minutes and then the
water runs in. aThe display shows
either pro-
gram duration or the Ready in time is
displayed.
aThe display shows after program
end:end .
3.Fold down and lock the dosing
aid.
13.9 Change activated Ready in
time
If you have set and activated the Ready
in time for a delayed program start,
you can change the Ready in time
again before the program starts.
4.Push in the detergent drawer.
requirements
¡The program is set.
→
"Set program", page 30
¡The Ready in time is set and
activated.
→
"Buttons", page 23
13.7 Fill in detergent and care
products
Hints
¡Use the dosing aid for liquid
Do not use vinegar detergent with
gel-type detergents, washing
powder, activated prewash or Ready
in time.
¡Note the notes on
detergents and care products
→
page 29
.
1.onStart/Reloadto press.
The activated Ready in time is
paused.
2.onCompleted inPress until the
display shows the desired Ready in
time.
drawer out-
3.onStart/Reloadto press.
1.The Detergent Sch
draw.
The modified Ready in time is
activated.
2.The detergent egg
→
"detergent
page 19
fill.
drawer",
31