Transport, storage and disposalen
17.1 Emergency release
1.Turn off the tap.
2.Empty the water inlet hose.
3.Turn off the device.
unlock door
Precondition:The drain pump is
empty. →
page 34
4.Unplug the device from the mains.
1. ATTENTION!Escaping water can
cause damage to property.
▶ Do not open the door if there is
water on the glass.
5.Drain the suds.
→
"Cleaning the drain pump",
page 34
6.Disconnect the hoses.
Pull the emergency release down
with a tool and release.
18.2 Insert transport locks
Secure the device for transport with
the transport locks to avoid damage.
1.Remove the 4 cover caps with a
screwdriver.
aThe door lock is unlocked.
2.Insert the maintenance flap and snap it
into place.
3.Close the maintenance flap.
Save the top caps.
18 transport,
storage and disposal
2.Install the 4 transport locks. Use the
description as a guide
→
"Remove transport locks",
page 14
and proceed in reverse
order.
Find out here how to prepare your
device for transport and storage. You
will also learn how to dispose of old
devices.
18.1 Disassemble the device
18.3 Put the device into
operation again
A notice:Further information can be
found in the digital
ch the scan
m content
w.bosch-ho-
▶ For more information see
→
"Setting up and connecting",
page 13
and
→
"Before first use", page 20
.
instruction manual
Find the QR code in
the directory or on ww
me.com.
47
To Next Page
Loading...
