enservice
13.2 Set program 13.5 Use dosing aid for liquid
detergent
1.Turn the program selector and set it
to the required programme.
→
"programs", page 24
If you order the dosing aid as an
accessory, you must use the dosing
aid.
1.Pull out the detergent drawer.
2.If necessary, adjust program
settings →
page 30
.
13.3 Customize program
settings
2.Press down the insert and remove
the detergent drawer.
Precondition:A program is set.
→
"Set program", page 30
▶ Adjust the program settings.
→
"Buttons", page 23
A notice:The program settings are not
saved permanently for the program.
13.4 Load laundry
3.Insert the dosing aid.
A notice:To avoid creasing, observe
the maximum load of the
→
"programs", page 24
.
Precondition:The laundry is prepared.
→
"Laundry", page 28
1.Open the door.
Make sure the drum is empty.
2.Put the laundry in the drum.
3.Close the door.
4.Insert the detergent drawer.
Make sure no laundry is caught in
the door.
13.6 Use dosing aid for liquid
detergent
You can use a dosing aid in the
detergent drawer to measure out
liquid detergent.
1.Pull out the detergent drawer.
30
To Next Page
Loading...
