Bose FreeSpace IZA 190-HZ User Manual

English Installation and Operation Page 33
pro.Bose.com Installation
3. Place the amplifiers side by side and attach the two (2) link brackets to the amplifier chassis with four (4) included
screws each.
CAUTION: Only use the mounting hardware recommended by the rack manufacturer.
4. Mount amplifier in rack with four (4) rack screws and washers (not included).
Using the rear rack ears for strain relief
The slots on the rear rack ears can be used to provide strain relief with standard wire ties.
Spacing requirements for rack-mounted amplifiers
Allow 1RU spacing above and below rack-mounted amplifiers to ensure sufficient spacing for ventilation. Additionally, the
temperature of the rack should be controlled to ensure that amplifiers are not exposed to temperatures exceeding 40° C
(104° F).

Bose FreeSpace IZA 190-HZ Specifications

General

Amplifier class	D
RMS rated power	90 W
Channels quantity	1 channels
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	1 %
XLR in	Yes
Line inputs (RCA)	2
Line outputs (RCA)	1
Speakers connectivity type	RCA
Product color	Silver
Rack capacity	1U
Volume control	Rotary
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power protection features	Overheating, Short circuit
Power consumption (typical)	15 W
Package weight	4100 g

Weight and Dimensions

Depth	310 mm
Width	214 mm
Height	45 mm
Weight	3200 g