Bose L1 Pro8 Instruction Manual

System Performance
Model Name Ll ProS
System Type Self-powered line array with integrated bass module and onboard three-channel digital mixer
Frequency Response (-3 dB) ‘ 45 Hz to 16 kHz
Frequency Range (-10 dB) 33 Hz to 18 kHz
Nominal Vertical Coverage Pattern 40°
Vertical Beam Type C-shape
Nominal Horizontal Coverage Pattern 180°
Calculated Maximum SPL ‘
`
m 1 m. continuous’
112 dB
Calculated Maximum SPL # 1 m. peak’ 118 dB
Crossover 200 Hz
Transducers
Low Frequency 1 x RaceTrack low-frequency driver r x 13″
Low-Frequency Voice Coil Size 2″
High / Mid Frequency 8 x Articulated 2″ drivers
High / Mid Frequency Voice Coil Size ‘G
Driver Protection Dynamic limiting
Amplification
Type Two-channel. Class D
Low-Frequency Amp Channel 240 W
High / Mid Frequency Amp Channel 60 W
Cooling Convection cooling
Onboard Mixer
Channels Three
Channel 18 2 Input: Audio Type Combination XLR or ‘A” TRS connector (mic/instrument/line)
Channel 18 2 Input: Input Impedance 10 KO (XLR): 2 MO (TRS)
Channel 1 8 2 Input: Trim
0 dB.12 dB. 24 dB. 36 dB, and 45 dB analog gain steps automatically selected and compensated by
DSP
Channel 1 8 2 Input: Channel Gain -100 dB to +75 dB (XLR): -115 dB to +60 dB (TRS): from input to driver. controlled by volume knob
Channel 18 2 Input: Max Input Signal +10 dBu (XLR): +24 dBu (TRS)
Channel 3 Input: Audio Type ‘A” TRS (stereo-summed, line). Ye TRS (line). Bluetooth’ audio streaming
Channel 3 Input: Input Impedance 40 KC) (3.5 mm): 200 KO (TRS)
Channel 3 Input: Channel Gain
-105 dB to +50 dB (3.5 mm): -115 dB to +40 dB (TRS): from input to driver. controlled by the volume
knob
Channel 3 Input: Max Input Signal +11.7 dBu (3.5 mm): +24 dBu (TRS)
ToneMatch: Audio Type
RJ-45 connector for ToneMatch cable connection. providing digital audio and power connection for the
optional T45/T85 ToneMatch Mixer
Output: Audio Type XLR connector. line level. full-frequency bandwidth
Bluetooth Enabled Yes
Bluetooth Types AAC or SBC for audio streaming. LE for system control
Channel Controls 3 digital rotary encoders
Phantom Power Channel 18 2
LED Indicators
Standby. Channel Parameters. SignaVCIip. Mute. Phantom Power. ToneMatch. Bluetooth LED. System
E0

Bose L1 Pro8 Specifications

General

Tweeter	Yes
Amplifier	Built-in
Speaker type	-
Amplifier class	D
Number of drivers	8
Number of speakers	1
Woofer diameter (imperial)	13 \
Tweeter diameter (imperial)	2 \
Frequency range	- Hz
RMS rated power	300 W
Speakers RMS power	60 W
Sound pressure level (max)	118 dB
Wi-Fi	No
AUX in ports	2
Connectivity technology	Wired & Wireless
Type	Freestanding Public Address (PA) system
Control type	Buttons, Rotary
Product type	2.1 portable speaker system
Mounting type	Floor
Product color	Black
Volume control	Rotary
Number of mixer channels	3 channels
Power source type	AC

Weight and Dimensions

Depth	440 mm
Width	318 mm
Height	2005 mm
Weight	18000 g