System Setup
14 - English
Step 3: Set up the Acoustimass
®
module
What you need:
Rubber feet Power cordAcoustimass module
CAUTION: Choose a stable and level surface for the Acoustimass module.
Vibration can cause the speaker to move, particularly on smooth surfaces
like marble, glass, or highly polished wood.
A. When placing the Acoustimass module on bare floors, or other smooth
surfaces, attach the included rubber feet to the bottom of the module for
greater stability and to protect your floor.
Rubber foot
Bottom panel
B. Plug the small end of the power cord into the Power connector.
For service only
Power
To Next Page
Loading...
