Operating Your System Sources
Selecting a source
The SOURCE menu allows you
to
select your sources and connected devices.
The menu can display a maximum
of
1 0 selections. When there are more than 1 0
selections,
an
arrow appears either at the
top
or bottom
of
the menu telling you
to
scroll up
or
down
to
see the other items.
1. Press the SOURCE button on the remote
to
display the list
of
connected
devices on your
TV.
Indicates more selections
above. Move highlight up.
Indicates more selections
below. Move highlight down.
2. Keep pressing SOURCE
to
move the highlight down the list and select the
source you want.
•
You
can also use the
up
A
or
down
T navigation buttons
to
select
a source.
• If you named a device during the setup process, the assigned name appears
in
the list. Unnamed devices appear as generic inputs such as "Input 1
(HDMI)" and "Input 2 (HDMI)."
• If you select a source that is turned off, a message appears on the screen
reminding you
to
turn on the source.
Note: When listening to audio sources, the system automatically enters Screensaver
mode to prevent the risk of screen burn-in. Press any button on the LIFESTYLE
remote to restore the picture.
To
disable the screensaver, see "Changing
System Options"
on
page 23.
Note: The UNIFY® intelligent integration system sets up your LIFESTYLE® remote to
control each of your devices.
If
one or more of these devices does not respond
to the
LIFESTYLE
® remote, see "Troubleshooting"
on
page 27.
16-
English
To Next Page
Loading...
