Bose LIFESTYLE 135 series II - Watching TV

Operating
Your
System
Sources
Watchin
TV
Your
TV
may be receiving its program content through a set-top box or the tuner
built into your
TV.
Note:
Since most televisions come with
an
IR
(infrared)
remote, you may need to
point the
Bose®
remote
at
your
TV
to operate
it.
Using a set-top box
If
you connected a cable,
satellite, or other set-top box to your
TV,
it will appear
in
the
SOURCE menu under the name you assigned it during the setup process.
1.
Press the remote
SOURCE
button and select the device that provides your
TV
programs.
2.
Tune
to
a station.
See
"Tuning to a
TV
station,"
below.
Using
the
tuner
in your TV
If
you are using the tuner
in
your
TV
to receive
TV
programs:
1.
Press the remote
SOURCE
button and select
TV.
2.
Press the
TV
Input
button
•
to select the internal tuner
in
your
TV.
3.
Tune
to
a station.
See
"Tuning
to
a
TV
station,"
below.
To
return to using other sources,
press the
TV Input
button •
to
first select
the input for the
Bose®
system, then press the
SOURCE
button and select
another source.
Tuning
to
a TV station
You
can tune to a
TV
station using any
of
the following methods:
OoO
OeG
OoO
o
8
e
I
Enter the channel number
on
the keypad and press
OK.
Use the
dash button for channel numbers using a dash or period.
Press
~
(channel up) or
T
(channel down) to change channels.
Press the
Last
button
~
to
tune to last selected channel.
Press the
GUIDE
button. Use the navigation, page up/down, and
OK
buttons
to
select a station from the program guide.
English- 17