Cent e in 8 the ve ume
On the remote;
• Press + to increase the volume.
• Press - to decrease the volume.
• Press _ to mute or unmute the audio.
Note: To confirm your TV speakers are turned off, see page 15.
Operation
Usin 8 autoowake
When the Solo 15/10 system is powered on but not playing audio, the system
powers off after one hour.
To wake the system, press _ on the remote.
You can set the Solo 15/10 system to automatically wake whenever a sound signal is
received.
To enable auto-wake:
1.
2.
Point the remote at the system.
Press and hold _ on the remote for 5 seconds.
The system emits three short ascending tones (going up) and the system status
indicator flashes amber.
To disable auto-wake:
1.
2.
Note:
Point the remote at the system.
Press and hold _ on the remote for 5 seconds.
The system emits three short descending tones (going down) and the system
status indicator flashes red.
If your devices become out of sync, see "Resyncing your cable/satellite box
and TV" on page 23.
English - 21
To Next Page
Loading...
