Bose Solo 10 - Using a Third-Party Remote; Using Dialog Mode

Operation
Using a third-party remote
A third-party remote, such as your cable/satellite box remote, can be programmed to
control your Solo system.
Referring to the owner's guide for your cable/satellite box remote, follow the instruc-
tions for programming the remote to control a TV. When it is time to enter a device
code, the owner's guide for the cable/satellite remote should tell you what to enter
for a Bose system.
Once programmed, the third-party remote should control basic functions such as
power on/off and volume.
Using dialog mode
Dialog mode provides optimal sound quality for dialog-only programming, such as
news and talk shows, by automatically adjusting the system's sound settings.
To enter dialog mode:
1. Point the remote at the system.
2. Press _.
The system status indicator blinks amber three times and then remains amber.
To exit dialog mode:
1. Point the remote at the system.
2. Press _.
The system status indicator blinks green three times and then remains green.
English - 2 7