Care and Maintenance
Rep acin the emote batteries
Solo 15 universal remote
Replace both batteries when the remote control stops operating or its range seems
reduced. Alkaline batteries are recommended.
1. Slide open the battery compartment cover on the back of the remote.
2. Remove both batteries.
Be sure to dispose of the batteries according to the regulations in your area.
3. Insert two AA (IEC-LR6) 1.5V batteries, or the equivalent. Match the + and -
symbols on the batteries with the + and - markings inside the compartment.
4. Slide the battery compartment cover back into place.
Solo 10 remote
Replace the battery when the remote control stops operating or its range seems
reduced.
1. Using a coin, turn the battery cover slightly counterclockwise.
2. Remove the cover and insert the new battery (CR2032 or DL2032) flat side up,
with the plus (+) symbol in view.
3. Re-seat the cover and turn it clockwise to lock into place.
English - 31
To Next Page
Loading...
