Operation
Programming the remote to control other devices
Using the appropriate source button and device code, follow the same procedure in
"Programming your remote to control your TV" on page 22.
Customizing the power button
You can customize the power button _ on your remote to power on/off your
Solo 15 system, TV and cable/satellite box simultaneously.
1. Program your remote to control your TV and cable/satellite box (see page 22).
2. Press and simultaneously and hold for ten seconds.
Both buttons flash three times.
Resyncing your cable/satellite box and TV
After customizing the power button, your cable/satellite box and TV may become out
of sync and not power on/off simultaneously. Use the following steps to resync your
system.
1. Press the source button for the device that is out of sync.
2. Press _ to power on or off the source.
3. Press _.
Your devices power on or off simultaneously.
English - 23
To Next Page
Loading...
