Bose SOUND LINK User Manual

15
OPERATION
Tab 6, 14
English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13
Tab 8, 16Tab2, 7, 15
• When a device is connected,
press to disconnect the device.
The SoundLink
®
speaker then waits
for a paired device to connect.
When the Bluetooth source is selected, and
no device connects within 30 minutes, the
speaker turns itself off.
Mutes sound from the speaker.
Plus increases speaker volume.
Minus decreases speaker volume.
The source indicator on the front
panel flashes once each time the
button is pressed. The indicator
flashes twice when maximum or
minimum volume is reached.
Pairing with Bluetooth
®
devices
Pairing occurs when two Bluetooth devices
communicate with each other and establish a
connection. A record of information about this
connection is then stored in the memory of
each device. Once you pair a device with the
SoundLink
®
speaker, you should not have to
pair it again.
The SoundLink
®
speaker can pair with up to
six Bluetooth devices. However, it can only
connect to, and play audio from one device at
a time.
To begin pairing with a Bluetooth device
1. With the Bluetooth device and the
SoundLink
®
speaker both turned on,
press and hold the Bluetooth button on
the speaker for three seconds to make the
speaker discoverable.

Bose SOUND LINK Specifications

General

Battery life	Up to 8 hours
Built-in Microphone	Yes
Aux Input	Yes
Wireless range	Up to 30 feet (9 meters)
Charging time	3 hours
Connectivity	Bluetooth