Bose SOUND LINK User Manual

18
OPERATION
Tab 3, 11
Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12
EnglishTa b 2, 10
Adding another source
You can use another audio device, such as
a portable digital music player, with your
SoundLink
®
speaker. This requires using an
audio cable with a 3.5 mm plug on one end
to connect with the AUX input on the
SoundLink
®
system. A cable with a 3.5 mm
plug on both ends is provided.
To add a source
1. Plug the cable from the audio device into
the (AUX) connector on the back of the
SoundLink
®
speaker.
2. Press the AUX button.
3. Adjust the volume on the connected
device to near maximum, then use the
SoundLink
®
speaker volume buttons to
adjust the level.
If a device is connected but not playing audio,
the speaker will turn itself off after 30 minutes.
Service connector
The service connector on the rear of the
speaker is for software updates only and will
not play audio from any connected device.

Bose SOUND LINK Specifications

General

Battery life	Up to 8 hours
Built-in Microphone	Yes
Aux Input	Yes
Wireless range	Up to 30 feet (9 meters)
Charging time	3 hours
Connectivity	Bluetooth