Bose SOUNDLINK FLEX SE - Page 33

33
|
ENG
TROUBLESHOOTING
COMMON SOLUTIONS
If you experience problems with your speaker:
• Power on the speaker (see page 14).
• Check the state of the status lights (see page 19).
• Make sure your mobile device supports Bluetooth technology (see page 22).
• Charge the battery (see page 16).
• Increase the volume on your speaker, device and music app.
• Move your device closer to the speaker and away from any interference
or obstruction.
• Try connecting another device (see page 24).
If you could not resolve your issue, see the table below to identify symptoms and
solutions to common problems. If you are unable to resolve your issue, contact
Bose customer service.
Visit: worldwide.Bose.com/contactworldwide.Bose.com/contact
SYMPTOM SOLUTION
No power (battery)
Battery may be in protection mode or discharged. Connect your
speaker to a wall charger.
Speaker does not
connect with
mobile device
On your device:
– Disable and then enable the Bluetooth feature.
– Delete your speaker from the Bluetooth list on your device.
Connect again (see page 24).
Connect a dierent device (see page 25).
Visit: worldwide.Bose.com/Support/FlexSEworldwide.Bose.com/Support/FlexSE to see how-to videos.
Clear the speaker pairing list (see page 25). Connect again.
No sound
Make sure voice prompts are on (see page 20). Press the
Bluetooth button l to hear the connected device. Make sure you
are using the correct device.
Use a dierent music source.
Connect a dierent mobile device (see page 24).
If two devices are connected, pause audio on the first device and
play audio on the other device.
If two devices are connected, move the devices within range of
the speaker (30 ft or 9 m).