Bose SoundTouch 10 - Page 36

36
FUNCTIONAL TEST PROCEDURES
1. Keypad Button Test
1.1 Press each button on the SoundTouch
®
10
keypad conrming LEDs reacts to each button
press.
1.2 For further investigation. Refer to pages
33 steps 1-6 and telnet to access TAP com-
mand prompt.
1.3 At TAP command prompt, enter “async_re-
sponses on”, then enter “bn echo on”.
1.4 Now press the keypad buttons, and ob-
served the TAP prompt response with refer to
below table.
2. Remote control Test and IR Test
2.1 Press each button on the SoundTouch
10 IR remote conrming LED reacts to each
button press.
2.2 For further investigation. Refer to pages
33 steps 1-6 and telnet to access TAP com-
mand prompt.
2.3 At TAP command prompt, enter “async_re-
sponses on”, then enter “ir echo on”.
2.4 Now press the IR button, and observed
the TAP prompt response with refer to below
table.
3. LEDs Test.
3.1 Refer to pages 33 steps 1-6 and telnet to
access TAP command prompt.
3.2 At TAP command enter “ rhinoled intensity
30 blue bt“ to turn on bluetooth blue LED at
luminance 30.
3.3 At TAP command enter “rhinoled blink 30
blue bt“ . This will turn on bluetooth LED and
blink it at luminance 30.
3.4 Repeat the process for other LED with
refer to format below.
Command Format:
intensity :
rhinoled intensity 0-63 [amber, white, blue]
[wi, bt, aux, shelby]
blink :
rhinoled blink 0-63 [amber, white, blue] [wi,
bt, aux, shelby]
Keypad Buon Key(#)
On 8
Bluetooth/AUX 18
1 12
2 13
3 14
4 15
5 16
6 17
Volume + 10
Volume - 11
Keypad Buon Key(#)
On 8
Bluetooth/AUX 18
1 12
2 13
3 14
4 15
5 16
6 17
Volume + 10
Volume - 11
Play/Pause 24
Backward 3
Forward 4
Like 6
Dislike 5