20
Personalising Your Wave
®
radio II
Français Español English
Changing the clock time format
You can choose to have the display show the time in 12-hour (AM/PM) or 24-hour (military)
time.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
2. Press Tune
> four times until TIME- is displayed.
3. Press Time – or Time + to select 12 HOUR or 24 HOUR.
4. Press Alarm Time (Menu) to exit the set-up menu or wait 10 seconds for the set-up
menu to end automatically.
Adjusting the display brightness
The brightness level of the display automatically adjusts itself for low and high ambient light
conditions. This feature brightens the display for better visibility in high ambient light
conditions and dims the display making it less intrusive in low ambient light conditions. High
and low brightness settings can be set independently.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
2. Press Tune
> five times until BRIGHT HI- is displayed.
3. Press Time – or Time + to set the high display brightness level to a value from 8-15.
4. Press Tune
> once until BRIGHT LO- is displayed.
5. Press Time – or Time + to set the low display brightness level from 1-8.
6. Press Alarm Time (Menu) to exit the set-up menu or wait 10 seconds for the
set-up menu to end automatically.
00.WRII_UKE.book Page 20 Tuesday, July 28, 2009 8:43 AM
To Next Page
Loading...
