Bose Wave Radio II User Manual

6
Setting Up Your Wave
®
Radio II
Français Español English
Setting the clock
After plugging in your Wave
®
radio II, set the clock using the remote. Your Wave
®
radio
II is easily operated using the remote control. Just aim the remote at the front panel and
press the buttons.
1. Press and hold Time – or Time + until
– CLOCK SET – appears on the display.
2. Press Time – to adjust the displayed time backwards or press Time + to adjust the
displayed time forwards until it matches the current time. You can also press and hold for
rapid adjustment.
3. Wait five seconds for the system to exit the clock set-up mode automatically.
To change the clock display from 12-hour (AM/PM) time to 24-hour (military) time, see
“Changing the clock time format” on page 20.
Note: In the event that the Wave
®
radio II loses power, the clock time and other system settings
are stored in backup memory for up to 48 hours. This feature retains the systems settings when
you unplug and move the unit or when a power outage occurs.
Note: Press-and-hold operations require holding the button down for at least one second.
00.WRII_UKE.book Page 6 Tuesday, July 28, 2009 8:43 AM

Bose Wave Radio II Specifications

General

Tuner	AM/FM
Display	LCD
Clock	Yes
Alarm	Yes
Sleep Timer	Yes
Outputs	Headphone jack
Remote Control	Yes
Audio Output	Stereo
Type	Tabletop
Inputs	Auxiliary
Presets	6 AM, 6 FM
Speaker Type	Built-in