9
Operating Your Wave
®
radio II
English FrançaisEspañol
Reading the display
Turning the Wave
®
radio II on and off
Press On/Off once to turn the Wave
®
radio II on or off. The Wave
®
radio II turns on to the last
source played.
OR
Press any source button to turn the Wave
®
radio II on to that source. Pressing the AUX does
not turn on an auxiliary source (such as your TV), so turn that on first.
Controlling the volume
Press and hold Volume or to adjust the volume level. VOLUME - 0 (silent) to 99
(loud) appears on the display to indicate the level.
Press Mute to silence the Wave
®
radio II. Press Mute again, or press Volume to unmute.
To lower the volume before unmuting, press Volume while muted.
Note: When the Wave
®
radio II is off, the volume can only be adjusted between 10 and 75.
Setting up automatic shutoff (Sleep)
Press Sleep to set the Wave
®
radio II to shut off automatically after a selected period of time.
• After pressing Sleep, SLEEP - 30 MIN appears on the display and the sleep timer
begins counting down. If your Wave
®
radio II is off, press Sleep to turn it on and
immediately set the sleep time. The last source selected will start playing as the sleep
timer counts down.
• While the SLEEP setting is displayed, press Sleep again to set the sleep timer to
10-90 minutes (in 10-minute increments) or OFF.
Note: While in sleep timer set-up mode, if more than 10 seconds elapses between button
presses, the Wave
®
radio II will automatically exit the sleep timer set-up mode.
• To review the remaining sleep time, press Sleep.
• To cancel the sleep timer, press On/Off.
Clock time in 12-hour (AM/PM)
time or 24-hour (military) format
Displays operating information for the active
source or the set-up menu.
Alarm time appears when alarm is
set.
SLEEP appears when the sleep
timer is activated.
FM, AM, AUX or Bose
®
link
appears for the selected source.
00.WRII_UKE.book Page 9 Tuesday, July 28, 2009 8:43 AM
To Next Page
Loading...
Need help?
General
