22
Personalising Your Wave
®
radio II
Français Español English
Performing a system reset
If you wish, you can restore your Wave
®
radio II to the original factory settings.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
2. Press Tune
> nine times until RESET ALL- NO is displayed.
3. Press Time + to change RESET ALL- NO to RESET ALL- YES.
4. When PRESS 2 TO CONFIRM appears on the display, press Presets button 2. When
the reset is complete, DEFAULTS RESET is displayed.
5. Press Alarm Time (Menu) to exit the set-up menu or wait 10 seconds for the set-up
menu to end automatically.
Alarm
Time
Menu
Alarm
Time
Menu
Tune
00.WRII_UKE.book Page 22 Tuesday, July 28, 2009 8:43 AM
To Next Page
Loading...
