Mounting
Mounting on ATV or UTV
Always consult an expert when in doubt about the installation.
Use only the supplied accessory for mounting. Using other mounting methods may void the warranty.
To ensure safety of the mounted sound system, always check the mounting conditions (e.g.
mounting straps) of the sound system before each vehicle ride.
1. Using the two supplied mounting straps and zip ties, secure the sound system on the rails or roll bars of
your vehicle, as shown in the gure below. Make sure the sound system is securely attached to your vehicle.
No special tool is required when mounting the sound system on ATV or UTV.
The illustration is for reference only. Your vehicle may vary.
4
To Next Page
Loading...
