Switching On the Anti-feed-
back Auto Function
1. Press the Anti-feedback Auto pedal.
fig.14
The pedal indicator blinks while detection of the
howling point is in progress, and lights up steadi-
ly when detection ends.
Switching off the power returns the pedal to
its off state.
When there’s no input, no automatic detec-
tion is performed.
Redoing Automatic
Detection
1. Depress the pedal again.
Switching Off the Anti-feed-
back Auto Function
1. Hold down the pedal for two sec-
onds or more.
The pedal indicator blinks then goes dark, and
the Anti-feedback Auto function is switched off.
Switching off the power returns the pedal to
its off state.
15
AD-3.e 07.6.7 1:22 PM Page 15
To Next Page
Loading...
