Boss DS-1 User Manual

2
Thank you, and congratulations on your choice of BOSS DS-1 Distortion.
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY”
and “IMPORTANT NOTES” (separate sheet). These sections provide important information
concerning the proper operation of the unit. Additionally, in order to feel assured that you
have gained a good grasp of every feature provided by your new unit, this manual should
be read in its entirety. The manual should be saved and kept on hand as a convenient
reference.
Copyright © 1994 BOSS Corporation
All right reserved. No part of this publication may be reproduced in any form without the
permission of BOSS Corporation.

Boss DS-1 Specifications

General

Effect Type	Distortion
Controls	Level, Tone, Distortion
Bypass	Buffered Bypass
Input Impedance	470 kOhms
Output Impedance	1 kOhm
Current Draw	4 mA
Input	1/4 inch jack
Output	1/4 inch jack
Power Supply	9V DC, 9V battery
Weight	400 g
Connectors	Input jack, Output jack
Dimensions	73mm (W) x 129mm (D) x 59mm (H)