AppendixBLevelSettingsOverview
©Copyright2000-2002BarryS.Pearceetal. 143
Crikey there are a lot, and I mean A LOT of volume
controlsonthisbeast.Infactthereare32placesontheGT-
5and36placesontheGT-3wherethevolumelevelsmay
be changed! The problem is knowing whether or not it
really is the effect level (thereby proving a mix), direct
volumelevelorwhat?
Well,thishandydandylevelgaugeiswhatyouneed!
Quicklegend—ControlTypecanbe:
•
EffectOnly-Thelevelaffectsonlytheeffectnot
thedirectsound.Thereforeyoucandecideonhow
muchtheeffectcoloursthesound.
•
Direct Only - Determines how much of the
unchangedsignalispassedthrough.
•
Signal - The levelis basically anin-line volume
controlknob.Puttingthisat0meansnosound!
Aneffectthathas'EffectOnly'and'DirectOnly'controls
givesyoutheultimateinmixoptions.
Effect SettingName ControlType
AC Level Signal
AW Level Signal
CE EffectLevel EffectOnly
CS Level Signal
DD EffectLevel EffectOnly
EQ Level Signal $$$
FB Level EffectOnly
FB Level(^) EffectOnly
FV Level Signal
HR HR1Level EffectOnly
HR HR2Level EffectOnly
HR DirectLevel DirectOnly
HU Level Signal
LM Level Signal
Master MasterLevel Signal
OD/DS Level Signal
PRE Volume Signal ***
PRE MasterVolume Signal
PRE Gain Signal ***
RM EffectLevel EffectOnly
RM DirectLevel DirectOnly
RV EffectLevel EffectOnly
SDD EffectLevel EffectOnly
SEQ Level Signal $$$
SYN SynthLevel EffectOnly
SYN DirectLevel DirectOnly
WAH Level Signal
The SG—Slow Gear, TR—Tremolo/Pan, NS—Noise
Suppressor,andFV—FootVolumeallworkoverthewhole
volume range, however the maximum gain is 1:1 (unity
gain).
$$$ The EQ level is an adjustment used to balance the
overalleffectoftheEQsoastoobtainunitygain.
***ThePreampvolume (notthemastervolume)willnot
onlyaffectthesignallevel,butitalsochangesthecharacter
oftheamp,tendingtoproducedistortionathighervolumes.
Well it does what the real thing does, really! The Gain
control, whilst not exactly providing an obvious volume
control,willsignificantlyalterthesignallevelifchanged.
Effect
SettingName ControlType
2CE LoLevel EffectOnly
2CE HiLevel EffectOnly
AR EffectLevel EffectOnly
AR DirectLevel DirectOnly
FL Level Signal
PH Level Signal
PIC Level Signal
PRE MicLevel EffectOnly
PRE DirectLevel DirectOnly
The SL—Slicer works over the whole volume range,
howeverthemaximumgainis1:1(unitygain).
Effect
SettingName ControlType
DD DirectLevel DirectOnly
Loop SendLevel Signal !!!
SP MicLevel EffectOnly
SP DirectLevel DirectOnly
TR Balance Signal %%%
!!! The send level only determines the level sent to the
SEND output jack. It does NOT change the level of the
signal received at the RETURN jack. This means the
external device used last in the loop must send an
appropriatelevelbacktotheGT-5.
%%%TheTremolo/Panbalancecontroladjuststhebalance
ofthestereofieldratherthanprovidingatraditionalvolume
control.
IngeneralRolandhasbeenveryconsistent.Wheretheysay
'effectlevel'or'directlevel'theymeanjustthatandplain
old'level'meanssignallevel.