Boss RC-10R User Manual

Basic Operation
10
Synchronizing the looper and rhythm (p. 15)
You can specify whether the looper and rhythm operate simultaneously (SYNC ON) or separately (SYNC OFF).
To turn SYNC on/o, hold down the [RHYTHM] switch for two seconds or longer while the looper and rhythm are stopped.
When SYNC is on, the RHYTHM indicator changes color.
SYNC OFF: red and green
SYNC ON: red and light blue
Looper operationLooper operation
OVER-
DUBBING
OVER-
DUBBING
REC
(record)
REC
(record)
* If there is no recorded data, you’ll start with recording.
PLAY
(loop playback)
PLAY
(loop playback)
Press
(undo/redo)
Two
seconds
Press
(loop playback)
Once
Press
(overdubbing)
Once
* If there is no recorded
data, you’ll start with
recording.

Boss RC-10R Specifications

General

Sound effects	Looper, Reverberation
Sound effects quantity	-
DC-in jack	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	1
Display type	LCD
Power source type	DC

Weight and Dimensions

Depth	138 mm
Width	101 mm
Height	63 mm
Weight	620 g