Boss RC-20 User Manual

5
Panel Descriptions
the number of times that is equivalent to the
numerator of the desired time signature (p. 25 ) .
7
WRITE Button
•This button is used to save a recorded
phrase into internal memory (p. 23).
•You can use the WRITE button and EXIT
button to delete the contents of the selected
phrase track (p. 23).
EXIT Button
This button is used to halt a phrase save or
delete operation.
8
AUTO START Button
Turn this button on (indicator lit) if you want
recording to begin simultaneously when the
performance begins.
9
MODE Button
This button selects the recording method.
10
POWER Indicator
This indicator will light when the power is on.
* When the batteries run down, the POWER
indicator will become dim. When this occurs,
please replace them with new batteries.
11
REC Indicator
This indicator will light during recording.
PLAY Indicator
This indicator will light while a phrase is
playing.
OVERDUB Indicator
This indicator will light during overdubbing.
12
Left Pedal
•Provides for switching among phrase
recording, playback, and overdubbing.
A phrase track in which no phrase is recorded:
recording ➔ playback ➔ overdubbing
A phrase track in which a phrase has been recorded:
playback
➔
overdubbing
•If you press and hold the pedal for two
seconds or longer, the unsaved phrase will
be deleted.
Right Pedal
•Provides for switching among phrase
recording, playback, and overdubbing.
•You can set the tempo to the timing at
which you press the pedal.
•If you press and hold the pedal for two
seconds or longer, the unsaved phrase will
be deleted ( clear ; p.22).
12
1011

Boss RC-20 Specifications

General

Type	Loop Station
Number of Memory Banks	11
Sampling Frequency	44.1 kHz
Input Impedance	1 MΩ
Output Impedance	1 kΩ
Power Supply	9V DC (PSA-series adapter)