Bostitch CAP1512-OF User Manual

BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA,TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI
VOUS AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
191705REVA 01/10
OPERATION and MAINTENANCE MANUAL
MANUALES DE OPERACIÓN y MANTENIMIENTO
LES MANUELS D’UTILISATION et D’ENTRETIEN
CAP1512-OF AIR COMPRESSOR
COMPRESOR DE AIRE CAP1512-OF
COMPRESSEUR D’AIR CAP1512-OF
Stanley Fastening Systems L.P.

Bostitch CAP1512-OF Specifications

General

Brand	Bostitch
Model	CAP1512-OF
Category	Air Compressor
Language	English

Summary

Introduction and Safety Warnings

Safety Warning Levels

Explains DANGER, WARNING, and NOTICE levels for hazardous situations.

Rules for Safe Operation

Moving Parts Safety

Personal Protective Equipment

Wear ANSI Z87.1 eye protection and hearing/head protection as needed.

Air Tank Maintenance Safety

Drain moisture daily to prevent corrosion and risk of explosion.

Ventilation Safety

Do not spray flammable liquids in confined areas; ensure good ventilation.

Burn Hazard Prevention

Electrical Grounding and Duty Cycle

Grounding Requirements

Product must be grounded; use proper plug and outlet or qualified electrician.

Safety Valve Function

Factory pre-set at 160 PSI to prevent over-pressurization.

Duty Cycle Guidelines

Do not operate compressor more than 50% duty cycle for long life.

Extension Cord Usage

Features of the Bostitch CAP1512-OF

Pressure Switch Operation

Regulator Knob Adjustment

Operation and Maintenance

Pre-Start Procedures

Start-Up Procedures

Shut-Off Procedures

General Maintenance Practices

Draining Tank - Ball-Style Valves

Tilt compressor, open valve, drain until moisture is removed.

Troubleshooting Guide

Unit Will Not Run

Check pressure, fuse, switch, and plug connections.

Air Leaks at Fittings

Unit Will Not Build Pressure

Check for leaks, loose parts, gasket issues, or valve problems.

Tank Modification Safety Warning

Do not drill, weld, or modify the air tank; replace if damaged.