Need help?Do you have a question about the Bostitch CWC100 and is the answer not in the manual?
General| Max Pressure | 150 PSI |
|---|---|
| Tank Capacity | 6 Gallons |
| Power Source | Electric |
| Noise Level | 78.5 dBA |
| CFM at 90 PSI | 2.6 CFM |
| Voltage | 120 V |
| Amps | 15 Amps |
Diagnosing issues when the compressor fails to start or has trouble starting.
Troubleshooting motor humming without starting, checking voltage, cords, and capacitors.
Diagnosing no-start conditions when the motor does not hum, checking fuses, switches, and pressure.
Addressing compressor stopping shortly after starting, checking capacitors, valves, and voltage.
Resolving issues where the compressor trips the circuit breaker after running briefly.
Diagnosing why the compressor hums but won't restart after shutting off.
Identifying a continuous hiss of air coming from the pressure switch unloader valve.
Troubleshooting why the compressor runs continuously but fails to reach full pressure.
Addressing issues where the compressor runs, stops, but does not achieve full pressure.
Resolving why the compressor does not shut off after reaching its pressure setting.
To Next Page
