Bostitch CWC200ST User Manual

BEFORE OPERATING THIS COMPRESSOR, THE USER SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE COMPRESSOR FOR FUTURE REFERENCE. IF YOU HAVE ANY
QUESTIONS, CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE USAR ESTE COMPRESOR, EL USUARIO DEBE ESTUDIAR ESTE MANUAL PARA
ENTENDER Y SEGUIR LAS ADVERTENCIAS DE SEGURIDAD Y LAS INSTRUCCIONES.
CONSERVE ESTAS INSTRUCCIONES CON EL COMPRESOR PARA REFERENCIA FUTURA. SI
TIENE ALGUNA PREGUNTA, DIRÍJASE AL REPRESENTANTE O AL DISTRIBUIDOR.
AVANT D’UTILISER LE COMPRESSEUR, L’UTILISATEUR DOIT LIRE CE MANUEL AFIN DE
COMPRENDRE ET DE RESPECTER LES AVERTISSEMENTS ET CONSIGNES DE SÉCURITÉ.
GARDER CES INSTRUCTIONS AVEC LE COMPRESSEUR POUR RÉFÉRENCE ULTÉRIEURE.
POUR DE PLUS AMPLES INFORMATIONS, COMMUNIQUER AVEC VOTRE REPRÉSENTANT OU
DISTRIBUTEUR BOSTITCH.
165291REVC 03/06
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
CWC200ST
AIR COMPRESSOR
COMPRESOR DE AIRE
COMPRESSEUR D’AIR
STANLEY FASTENING SYSTEMS L.P.

Bostitch CWC200ST Specifications

General

Brand	Bostitch
Model	CWC200ST
Category	Air Compressor
Language	English

Summary

Introduction

Limited Warranty

Outlines the terms and duration of the product warranty, including limitations and consumer rights.

Rules for Safe Operation

General Safety Precautions

Covers user education, moving parts, attachments, personal protection, and transporting guidelines.

Tank and Ventilation Safety

Addresses air tank care, ventilation for spraying, and burn risks.

Electrical Grounding Instructions

Grounding and Safety Valve

Explains grounding procedures, associated risks, and the function of the safety valve.

Duty Cycle and Extension Cords

Details recommended duty cycle and guidelines for using extension cords for optimal performance.

Specifications

Features of the Bostitch CWC200ST

Key Compressor Components

Identifies and describes the pressure switch, gauges, regulator, ports, and plugs.

Operation Instructions

Operating Procedures

Covers pre-start, start-up, and shut-off steps for safe and effective compressor operation.

General Maintenance

Maintenance & Oil Level Checks

Outlines general service, safety, and procedures for checking the compressor oil level.

Oil Change and Tank Draining

Details procedures for changing compressor oil and draining moisture from the air tanks.

Air Filter Maintenance

Instructions for cleaning or replacing the air filter element to maintain performance.

Trouble Shooting Guide

Unit Not Running Issues

Addresses causes and corrections when the compressor fails to start or run.

Air Leaks and Pressure Build-up

Covers troubleshooting for air leaks at fittings, pressure switch, and tank, plus pressure issues.

Air Tank Safety

Highlights critical warnings regarding air tank modifications and potential hazards.