Bostitch CAP60P-OF User Manual

BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY
QUESTIONS, CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN
ESTUDIAR ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS
SOBRE SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE
CON SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER
UNE ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI
VOUS AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
174119REVA 01/06
OPERATION and MAINTENANCE MANUAL
MANUALES DE OPERACIÓN y MANTENIMIENTO
LES MANUELS D’UTILISATION et D’ENTRETIEN
AVERTISSEMENTS
CAP60P-OF AIR COMPRESSOR
COMPRESOR DE AIRE CAP60P-OF
COMPRESSEUR D’AIR CAP60P-OF
Stanley Fastening Systems L.P.

Bostitch CAP60P-OF Specifications

General

Max Pressure	150 PSI
Tank Capacity	6 Gallons
Power Source	Electric
Weight	33.07 lbs
Voltage	120V
SCFM @ 90 PSI	2.6 SCFM
CFM at 90 PSI	2.6 CFM

Summary

Introduction

Safety Warning Definitions

Explains the meaning of DANGER, WARNING, and NOTICE symbols for safety.

Rules for Safe Operation

Operator Education

Emphasizes understanding the manual before operation.

Moving Parts Safety

Precautions regarding moving components and guards.

Attachments and Accessories Pressure

Guidelines for using compatible tools and accessories safely.

Personal Protective Equipment

Requirements for eye, hearing, and head protection.

Compressor Transport

Safe methods for moving the compressor unit.

Air Tank Maintenance

Instructions for draining the air tank to prevent corrosion.

Ventilation and Fire Safety

Safety precautions for operating in areas with flammable liquids.

Burn Hazard Prevention

Warnings about touching hot compressor parts.

Electrical Grounding Instructions

Grounding Plug and Adapter Use

Details on proper grounding plug usage and adapters.

Thermal Overload Protector

How the motor overload protector functions.

Safety Valve Operation

Information on the compressor's safety relief valve.

Duty Cycle and Extension Cords

Guidelines on duty cycle and extension cord use.

Specifications

Features of the Bostitch CAP60P-OF

Pressure Switch Function

Explains the function of the pressure switch.

Tank Pressure Gauge

Describes the gauge indicating air pressure in the tank.

Regulated Pressure Gauge

Explains the gauge showing output pressure from the regulator.

Regulator Knob Adjustment

Details on adjusting output air pressure.

Drain Cock Operation

Describes the valve for draining moisture.

Operation Instructions

Pre-Start Procedures

Steps to take before starting the compressor.

Start-Up Procedures

Step-by-step guide to start the compressor.

Shut-Off Procedures

Steps to safely turn off the compressor.

General Maintenance

Service and Maintenance Guidelines

General advice on servicing and using genuine parts.

Draining Tank Instructions

Detailed steps for draining moisture from the tank.

Limited Warranty

Trouble Shooting Guide

Unit Not Running

Lists probable causes and corrections for the unit not starting.

Air Leaks at Fittings

Identifies air leaks at connections and their fixes.

Air Leak at Pressure Switch

Addresses leaks from the pressure switch and solutions.

Unit Not Building Pressure

Troubleshoots issues preventing pressure build-up.

Tank or Tank Weld Leaks

Addresses leaks from the tank or its welds and the associated warning.