Need help?Do you have a question about the Botex DR-512 and is the answer not in the manual?
Power| power requirement | DC 9-12V, 500mA min |
|---|---|
| fuse | F 500mA 250V 5×20mm |
| binary coded switch input | 0~5V (no external voltage) /1mA |
Display| lcd screen | 2×16 characters |
|---|
Weight and Dimensions| dimensions | 482×120×44mm |
|---|---|
| weight | 1.6 kg |
Lists key features like DMX recorder, CF card access, sequences, and connectors.
Essential safety warnings and copyright notice for operating the DR-512.
Detailed description of the front panel controls, buttons, and indicators of the DR-512 unit.
Details the various connectors and ports located on the rear of the DR-512 unit.
Describes how to operate the unit freely, select sequences, and use STARTUP/SHUTDOWN functions.
Explains automatic sequence rerun, manual control during sequence, and STARTUP/SHUTDOWN behavior.
Details how to monitor DMX signals and trigger sequences based on signal presence or absence.
Describes using DMX channels (Ch1-Ch4) to control sequences (101-104) based on signal levels.
Allows recording new sequences and amending sequence names with specific operational steps.
Guides on selecting sequences, checking DMX status, pausing, and recording data.
Explains how to navigate and edit sequence names using front panel keys.
Details the seven configurable items in SETUP mode, including SMPTE trigger, record, frame, system time, and card formatting.
To Next Page