To Next Page

To Previous Page

User Manual DR-512

• For external storage, press CARD key, the relevant LED will light up, that means you

have entered the CF card operation(CF card should be firstly formatted before use).

The UP / DOWN keys can be used to choose sequences, and the PLAY / PAUSE /

STOP keys can be used to control the running of sequences. When under the state

of “STOP”, press the CARD key for a second time to return to the internal operation.

• Should the selected sequence not exist, the PLAY function will not be effective.

• NEXT, ENTER and RECORD functions will disabled when under the MANUAL mode.

6.2 AUTOSTART mode

• Under AUTOSTART mode, the foregoing recorded sequences can be rerun

automatically (To CF card , the sequences of STARTUP and SHUTDOWN will not be

trigged). During sequence running, press STOP key to activate the SHUTDOWN

sequence, when it stops running, all sequences will be stopped.

• AUTOSTART can be executed once. After the STARTUP sequence finished, the

selected sequences will run automatically, and relevant operation can be done

manually. Subsequently press the STOP key, the SHUTDOWN sequence will run

within a cycle.

• STARTUP and SHUTDOWN sequences can not be operated manually under this

mode, they can only automatically run after respectively pressing the PLAY and

STOP keys.

• AUTOSTART can be rerun the next time when the unit restarts.

6.3 DMX MON mode

• Under this mode, DMX signals can be monitored. In the case that the DMX signals

are disabled, this unit can initiate a prepared system to enable the pre-selected

sequences.

• When there is an effective signal input, the DMX indicator will light up, and the signal

(DMX Thru) will be send out through this unit. If the signal is missing, STARTUP and

the selected sequences will be triggered automatically. Press STOP key to stop the

running sequences. After the SHUTDOWN sequence run over, all the operation will

be finished.

• This unit can only check the effective DMX signals. If there is no data input, the

pre-selected sequences will be output normally.

• STARTUP and SHUTDOWN sequences can not be operated manually under this

mode. And the AUTOSTART mode may be available for reference to the operation

upon MANUAL mode.

dimensions	482×120×44mm
weight	1.6 kg

Botex DR-512 User Manual

Questions and Answers: