Features
1. 1.57*1.18inch (40*30mm) large backlit color screen (10A is black&white
screen).
2. Easier to check the working status of the battery with the function of
displaying the charging voltage and charging current alternately.
3. It is compatible with Li, SEL, FLD, AGM, GEL, LTO, and LFP batteries,
and auto-voltage identification is available for lead-acid batteries.
4. Built-in reverse connection protection, open-circuit protection,
high-temperature protection, and over-current/short-circuit protection,
which is all self-recovery type, with no damage to the controller.
5. Ultra-low heat generation, equipped with a heavy-duty heat sink,
ensures the maximum output of the controller.
6. With the USB output, maximum current up to 2A, supporting high
current charging of iPhone, iPad, and Android mobile phones and
other devices.
7. Complete multi-stage PWM charge management.
8. 32-bit high-speed master control chips.
2
To Next Page
Loading...