BougeRV Sunflow 60A User Manual

NEGATIVE GROUND
MPPT SOLAR CHARGE CONTROLLER
www.bougerv.com

BougeRV Sunflow 60A Specifications

General

Model	Sunflow 60A
Category	Controller
Type	MPPT Solar Charge Controller
Rated Current	60A
Max. Charge Current	60A
Input Voltage Range	12V/24V/36V/48V Auto
Weight	1.5 kg
Efficiency	≥ 98%
MPPT Tracking Efficiency	99%
Protection Features	Overload, Short circuit

Summary

Safety Instructions

General Safety Information

General safety guidelines for controller use and installation.

Charge Controller Safety

Safety precautions specifically for the charge controller.

Battery Safety

Safety guidelines related to battery handling and charging.

Identification Of Parts

LCD Display Interface Overview

System Wiring

Wiring Instructions

LCD Display Interface

Working Mode

Working Mode 1: Load mode

Working Mode 2: No load mode

Working Mode 3: Viewing mode

Bluetooth module

Parameter setting menu

Menu 1: Battery type setting (Mode 1, Mode 2)

How to set the battery type for operation.

Menu 2: System voltage(Mode 1, Mode 2)

Setting the system voltage for the controller.

Menu 2.1: Boost charging voltage(Mode 1, Mode 2)

Setting the boost charging voltage parameter.

Menu 2.2: Floating charging voltage(Mode 1, Mode 2)

Setting the floating charging voltage.

Menu 2.3: Boost charging reconnect voltage (Mode 1, Mode 2)

Setting the voltage for boost charging reconnection.

Menu 2.4: Equalizing charging voltage(Mode 1, Mode 2)

Setting the equalizing charging voltage.

Menu 2.5: Over-discharge voltage(Mode 1)

Setting the over-discharge voltage threshold.

Menu 2.6: Over-discharge delay(Mode 1)

Setting the delay for over-discharge protection.

Menu 2.7: Over-discharge reconnect voltage(Mode 1)

Menu 10: Load mode(mode 1)

Menu 10.1: Light control mode + Duration mode (mode 1)

Menu 11: Lithium battery low temperature charging protection (mode 1, mode 2)

Menu 12: Load short circuit protection ( mode 1)

Menu 13: Charging current (mode 1, mode 2)

Menu 14: Constant voltage output of lead acid battery (mode 1, mode 2)

Menu 15: Light control voltage(mode 1)

Menu 16: Light control delay(mode 1)

System restart & Factory reset

System restart(mode 1, mode 2, mode 3)

Factory reset (mode 1, mode 2, mode 3)

Error Code

Base Specification

Battery Charge Parameter

Charging

Charging of lead-acid battery

Charging of lithium battery