BougeRV Sunflow 60A - Menu 7: Discharge Energy of the Day(Mode 1, Mode 3); Menu 8: the Controller Temperature(Mode 1, Mode 2, Mode 3); Menu 9: the Battery Temperature(Mode 1, Mode 2,Mode 3)

18
Display the output energy of the
controller load port of the day.
Note: The value only can be read, but
cannot be adjusted;
Setting method: Same as above.
Display the battery temperature.
①°F (defaults)
②°C
Setting method: Same as above.
Display the controller temperature.
①°F (defaults)
②°C
Setting method:
1. On the controller temperature menu, press and hold [SELECT] for
more than 2s until the parameter flashes to enter the controller
temperature parameter setting interface.
2. On the controller temperature parameter setting interface, single
press [SELECT] or [ENTER] to choose the °F or °C .
3. After completing the parameter setting, press and hold [ENTER] for
more than 2s until the parameter does not flash, and the parameter
setting is successful; single press [ENTER] to switch to the next menu
or automatically jump back to the main menu after 10s of no
operation.
Menu 7: Discharge energy of the day(mode 1, mode 3)
Menu 8: The controller temperature
(mode 1, mode 2,mode 3)
Menu 9：The battery temperature
(mode 1, mode 2,mode 3)
16 9
81
16 9
81
16 9
81