21
①on: open load short-circuit protection
(default )
②oFF: close load short-circuit
protection
Setting method: Same as above.
Menu 12: Load short circuit protection(mode 1)
16 9
81
Adjust current range: 0——rated current
(for example:the 60A controller,
adjusting current range is 0-60A)
① Set 0:No charging
② Set 1——rated current:Limit charging
current(1 step)
Default: rated current
Setting method: Same as above.
Menu 13: Charging current (mode 1, mode 2)
16 9
81
① oFF: The controller can not output
without battery. (default)
②on: The controller can output without
battery.
Note: When the lead-acid battery cannot
work due to over-discharge, this function
can be turned on, and the controller can
activate the lead-acid battery with
constant voltage output lead acid battery
activation.
Setting method: Same as above.
Menu 14: Constant voltage output of lead acid battery
(mode 1, mode 2)
16 9
81