8 Cleaning
900-100_IFU-V1.0_11587-S0-20141209-EN ARC 100 Operating Manual 35
8. Cleaning
8.1. Preparation of the accessories
Prepare the accessories (e.g. surgical handpieces, instruments,
active electrodes, neutral electrodes and cables) as described in
the corresponding operating manuals.
Check the accessories before and after use for damage and
ensure that they are working properly.
8.2. Disinfection and cleaning
Pos: 66 /679-BOW A/HF-Gerät e/ARC 200/250/3 00e/8 Aufberei tung/Desinfiziere n und Reinig ung @ 6\mod_ 12970728811 68_258.doc @ 4 8122 @
NOTE
Incorrect use of the HF device can cause damage to the unit
Never sterilize the ARC 100 HF device. Instead, clean or disinfect
it.
WARNING
Risk of electric shock and fire!
Unplug the power cable before cleaning the device.
For surface cleaning, use approved cleaning agents and/or
disinfectants according to the manufacturer’s instructions.
Ensure that no liquid penetrates the device.
1. Apply the cleaning agent and disinfectant.
2. Wipe the agent off with a sponge moistened with clean water or
with a cloth.
3. Dry the device using a clean, lint-free cloth.
Pos: 67 /679-BOW A/HF-Gerät e/ARC 300/350/9 Wartung/UE_W artung/Repar atur @ 4\mod_ 12610406983 97_258.doc @ 35 203 @ 1
To Next Page
Loading...
