Bowa ARC 250 - Program 4 Argon (Only with Gastrocut Option); Program 5 Argon-Flex (Only with Gastrocut Option)

6 Operation
42 Operating Manual ARC 250 / 303 900-301_IFU-V2.2_11316-S0-20131023-EN
6.3.5. Program 4 "Argon" (only with GastroCut option)
In this program, open surgical interventions are carried out with the
additional device ARC PLUS for argon electrocoagulation. When
suitable instruments are connected, argon coagulation can be carried
out with rigid electrodes and argon cutting.
1. Connect the additional device ARC PLUS.
2. Connect the argon handpiece with the rigid probes to the
ARC PLUS.
3. Connect the surgical handpiece to the HF device.
Pos: 46 /679-BOW A/HF-Geräte/ ARC 200/250/3 00e/6 Bedienung/ Programm 5 "Argon Flex" (nur mit Option G astroCut) @ 6\ mod_129707 2401699_6.doc @ 48066 @ 3
6.3.6. Program 5 "Argon-Flex" (only with GastroCut option)
This program is used in argon electrosurgery with ARC PLUS.
In this program, surgical interventions are carried out with endoscopic
use of flexible probes with the additional device ARC PLUS for argon
electrocoagulation.
The connection port 29 has no function in the "Argon-Flex" program.

The key/display "Monopolar Output" 30 is preconfigured.
1. Connect the additional device ARC PLUS.
2. Connect the flexible probes to "Monopolar Output" 30 of the HF
device.
Pos: 47 /679-BOW A/HF-Geräte/ ARC 200/250/3 00e/6 Bedienung/ Programm 6 "GastroCut Pol" ( nur mit Opti on GastroCut) @ 6\mod_129 7072451824_6. doc @ 48085 @ 3