Bowa ARC 250 - Menu Programs; Overview

6 Operation
900-301_IFU-V2.2_11316-S0-20131023-EN Operating Manual ARC 250 / 303 45
6.4. Menu programs
The menu programs are standard programs for specifying basic
parameters, such as the operating language, sound, display and
memory options of the main programs.
6.4.1. Overview
The following menus are available:
 Menu program 1 "Set Language"
 Menu program 2 "Sound Level"
 Menu program 3 "Forced Coag Mode"
 Menu program 3A "GastroCut-Modes"
 Menu program 4 "Show Prev Inf-No"
 Menu program 5 "Hide Fix Prog"
 Menu program 6 "AutoStart Delay"
 Menu program 7 "Edit Prog Names"
 Menu program 8 "Restore Programs"
 Menu program 9 "Panel Check"
Selecting a menu program
1. When switching on the device, simultaneously press the on/off
switch 27 and the program selection switch 17 to see the list of
menu programs.

The current software version is displayed on the display/main
display 15.
2. Press the menu selection switch 16 to select a menu program.
3. Press the power limitation key for monopolar cutting 4 to launch the
selected program.
Exiting a menu program
 Press the power limitation key for monopolar cutting 3 to return to
the list of menu programs.
When the HF device is switched off, the new settings will be saved
automatically.
Pos: 50 /679-BOW A/HF-Geräte/ ARC 200/250/3 00e/6 Bedienung/M enü-Progra mm 1 "Set La nguage" @ 5\ mod_12701096 60851_6.doc @ 38554 @ 3