6 Operation
900-301_IFU-V2.2_11316-S0-20131023-EN Operating Manual ARC 250 / 303 49
6.4.8. Menu program 6 "Autostart Delay"
Use menu program "Autostart Delay" to change the delay time in
AUTOSTART mode.
1. Press the power limitation key for monopolar cutting 4.
2. Press the power limitation key for monopolar coagulation 10/11 to
adjust the start-up delay in 50 ms increments (from 50 to 2500 ms).
3. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
Pos: 57 /679-BOW A/HF-Geräte/ ARC 200/250/3 00e/6 Bedienung/M enü-Progra mm 7 "Edit Pr og Names" @ 6\mod_1298614 569289_6.doc @ 48730 @ 3
6.4.9. Menu program 7 "Edit Prog Names"
Use the menu program "Edit Prog Names" to edit the text shown on the
display/main display for user-defined programs.
Press the power limitation key for monopolar cutting 4.
Editing text in the display/main display
1. Press the program key 16/17 to select the program to be edited.
2. Press the key/display 12 for moderate coagulation in order to
enable editing mode.
Both EASY indicators 19/20 will light up.
3. Press the key for scabbing level 5 or 6 to select a letter or number.
4. Press the power limitation key for monopolar coagulation 10/11 to
toggle between upper and lower case.
5. Press the power limitation key for monopolar cutting 4 to select the
next letter or character.
6. Press the power limitation key for monopolar cutting 3 to delete the
last letter or character.
7. Press the key/display for AUTOSTART 26 to save entered names.
8. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
To Next Page
Loading...
