Bowa ARC 250 - Page 77

11 Technical specifications
900-301_IFU-V2.2_11316-S0-20131023-EN Operating Manual ARC 250 / 303 77
Setting
Program
Forced COAG Micro Cutting
2
Values measured on ohmic resistances
 Output power P [W] versus load
resistance R [Ω] with "Forced COAG
Micro Cutting" settings 30 W and 15 W
 Output power P [W] versus "Forced
COAG Micro Cutting" setting.
Rated load resistance = 500 
 HF output voltage U [Vp] versus
"Forced COAG Micro Cutting" setting
(no load)