BÖWE P15 - 4 Transport; Entry

10
P12-P15-P18
4 Transport
4
In order to guarantee that no damage results from the handling, we recommend that you consult with the
appropriate experts for correct transport, installation and connection.
You must provide suitable tools and equipment for unloading, transporting, machine entry and
installation. For example: crane, forklift, elevating truck, pulley block, rope, winch, crowbar, rollers,
wooden blocks, wedges.
Caution
Attention: Note the center of gravity of the machine and secure
against lateral tipping.
4.1 Entry
Normally the machine and distillation unit are packed in a crate or shipping box and kept in an upright
position when being transported and brought in.
Package dimensions (box measurements)
P12-P15-P18
Slimline
Crossline
Width
mm(in)
1150(45.3)
1970(77.6)
Depth P12-P15 /P18
mm(in)
2290(90.2) /2400(94.5)
1640(64.6) /1740(68.5)
Height
mm(in)
2410(94.8)
2460(96.8)
Entry dimensions after unpacking (Fan is dismantled)
Width
mm(in)
1080(42.5)
1840(72.4)
Depth P12-P15 /P18
mm(in)
2165(85.2) /2275(89.5)
1406(55.3) /1540(60.6)
Height
mm(in)
1990(78.3)
1990(78.3)
Entry dimension without angle bracket for trough
Width
mm(in)
935(36.8)
1695(66.7)