13
P12-P15-P18
5 Installation 5
5.1.4 Machine Environment
Do not operate systems with open flames, such as gas-heated flatwork ironers
or tumblers, in the same room because poisonous, corrosive gases could
result from the solvent decomposition.
No hot surfaces with a temperature of more than 140° C (284° F) are permitted in the machine
room.
You must ensure that the air from the machine room cannot escape into a heating room, if there
is one in the area.
The air from the machine room is not permitted to be directed into the exhaust line of a furnace
system.
To Next Page
Loading...
