Bowers & Wilkins 702 S2 User Manual

5
ENGLISH
1. Unpacking
Carton Contents
Check in the carton for:
1 Foam plug
1 Accessory pack containing
4 Rubber feet
4 M6 spike feet
4 Lock nuts (10mm across ats)
1 Plinth
1 Accessory pack containing
1 Allen key
4 M6 x 35mm screws
4 Plain washers
4 Shakeproof washers
Environmental Information
This product complies with international directives, including but
not limited to:
i. the Restriction of Hazardous Substances (RoHS) in
electrical and electronic equipment,
ii. the Registration, Evaluation, Authorisation and restriction of
CHemicals (REACH)
iii. the disposal of Waste Electrical and Electronic Equipment
(WEEE).
Consult your local waste disposal authority for guidance on how
properly to recycle or dispose of this product.

Bowers & Wilkins 702 S2 Specifications

General

Frequency Response	45Hz - 28kHz ±3dB
Sensitivity	90dB spl (2.83Vrms, 1m)
Impedance	8Ω (minimum 3.1Ω)
Crossover Frequencies	350Hz, 4kHz
Finish	Gloss Black, Satin White, Rosenut
Type	Floorstanding speaker
Description	Floorstanding speaker
Recommended Amplifier Power	30W - 200W
Drive Units	1x 150mm Continuum cone FST midrange
Harmonic Distortion	<1%
Dimensions	200mm
Weight	29.5kg (65 lb)