Bowflex BXT6 - Leveling the Machine; Treadmill Belt (Break in Period)

10
Leveling the Machine
The machine needs to be leveled if your workout area is uneven. To adjust:
1. Place the machine in your workout area.
2.Adjustthelevelersuntiltheyallcontacttheoor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to the machine
can occur.
3. Adjust until the machine is level.
Makesurethemachineislevelandstablebeforeyouexercise.
Treadmill Belt
Your treadmill comes equipped with a durable, high quality walking belt designed to provide many hours of reliable service. The walking belt on a
treadmillthathasnotbeenoperatedforalengthoftime,eitherinfactorypackagingorafterassembly,canexhibita“thumping”noisewhenstarted.
This is due to the belt taking on the curve of the front and rear rollers. This is a common occurrence and does not indicate a problem with your ma-
chine. After the treadmill has been used for a short period of time the thumping noise will discontinue. The amount of time will vary depending on the
temperature and humidity of the environment where the treadmill is placed.