Bowflex BXT6 - Machine Settings Mode

30
MACHINE SETTINGS MODE
The Machine Settings Mode lets you view the total run hours for the machine and the current versions of the main systems.
1. Hold down the PAUSE/STOP button and Down() button together for 3 seconds while in the Power-Up Mode to access the Machine Settings
Mode.
Note:PushPAUSE/STOPtoexittheMachineSettingsModeandreturntothePower-UpModescreen.
2. The Console displays the TOTAL HOURS for the machine.
3. Push the Right()buttontogotothenextoption.
4. The Console display shows the current Console Firmware Version.
5. Push the Right()buttontogotothenextoption.
6. The Console display shows the current Motor Control Board Firmware Version.
7. Push the Right()buttontogotothenextoption.
8. The Console display shows the current BLE Version.
9. Push the Right()buttontogotothenextoption.
10. The Console displays the DISCONNECT BLE NO prompt.
Note: If you want to disconnect the Bluetooth
®
transmitter,pushtheIncrease/Decreasebuttonstoselectthe“DISCONNECTBLEYES”
option,andpushEnter.TheConsolewillexittheMachineSettingsModeandreturntothePower-UpModescreen.
11. Push the Right()buttontogotothenextoption.
12. The Console displays the VIEW ERROR MSG NO option. This option is for Service Technicians use only.
13. Push the Right()buttontogotothenextoption.
14. The Console displays the RESET CONSOLE NO prompt.
Note:IfyouwanttoresettheConsoletofactorysettings,pushtheIncrease/Decreasebuttonstoselectthe“RESETCONSOLEYES”
option,andpushEnter.TurnthemachineoffwhentheConsoledisplaysthe“POWERCYCLENOW”prompt.
15. Push the Right()buttontoexittheMachineSettingsModeandreturntothePower-UpModescreen.